POWER-Drop™ Drop-In Anchor Mechanical Anchors Wej-It

Roll over image to zoom in

POWER-Drop™ Drop-In Anchor

The POWER-Drop is an internally threaded anchor that can be used with tamper-proof bolts, machine screws, and a variety of male-threaded fasteners. The anchor has a safety shoulder to eliminate bolt-end collapse and clip slippage for a secure fasten. 

(PD58 is same item as XPD58)

Pack Price

$36.20

Quantity

USA

ENGINEERED IN THE USA

Ships Fast within 24 hours
Orders received before 2:00pm EST Monday through Friday usually ship the same business day. We will send an email confirming your order the day your order is received. When your order ships we will send you a second email with your paid invoice and information to track your order.

Materials / Finishes

  • Zinc-Plated Carbon Steel

Features and Benefits

  • Enlarged 3-dimple clip increases response in lightweight concrete and requires fewer rotations to achieve desired torque
  • 360° segment contact on clip equalizes load distribution and increases load capacity
  • Unique safety shoulder supports clip under maximum and ultimate loads, preventing slippage
  • Internally threaded for easy bolt removability and service work
  • Numerous head style options

Downloads

Product Details
Installation
Catalog Number
Drill Bit Dia.
Thread Size
Anchor Length
Min. Hole Depth
Box Quantity
Carton Quantity
PD38
1/2
3/8 - 16
2-5/16
3
25
200
PD12
5/8
1/2 - 13
3-3/32
4
10
80
PD58
7/8
5/8 - 11
3-13/16
5
5
30
PD34
1
3/4 - 10
4-5/8
5-3/4
5
30
PD1
1-1/4
1 - 8
5
6-1/2
5
30

  1. Select the proper size drill bit from the Maximum Tensile Chart. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
  2. Drill the hole at least as deep as the full length of the anchor, but not closer than two anchor diameters to the bottom (opposite) surface of the concrete.
  3. Clean the hole using compressed air and a nylon brush.
  4. Tap the anchor, threaded portion last, into the hole. Make sure that the top of the anchor is flush with, or below, the level of the work surface.
  5. Insert the setting tool into the threaded end of the anchor and expand the anchor by striking the end of the setting tool with a hammer. The anchor is set (fully expanded) when the shoulder of the setting tool touches the anchor. Full expansion is necessary for proper anchor performance.
  6. The anchor is now ready to accept threaded hardware.

NOTE: Always wear safety glasses. Follow drill manufacturer's instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Reviews

Customer Reviews
4.8 Based on 6 Reviews
5 ★
83% 
5
4 ★
17% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
RC
02/15/2023
Roger C.
United States United States

great staff

I had a great experience the young lady that helped me help me in other ways and I do appreciate that very smart and very understanding young lady now getting back to the order order came great everything was in the order except the sacrificial bolt and I have been trying to find a fully threaded bolt and nobody around here seems to carry the fully threaded bolts so if you get this I got the washer I got the nut but I did not get the sacrificial bolt and it would be great if I could get that from you I guess I'll have to email and do that but other than the bolt missing everybody was great thank you

JM
01/27/2022
Jere M.
United States United States

Wedge Anchors

Perfect! Thank You

NI
01/24/2022
Norman I.
United States United States

Wej-it anchors

Haven't used them yet. If these work well as the set that came with the MaxJax car lift, they should be good.

AT
01/20/2022
Anthony T.
United States United States

Great price

Price was great, but shipping was way overpriced. Have not used anchors yet.

DJ
09/03/2020
Dalton J.
United States United States

Worked great

I bought these to install a MaxJax two-post lift in my garage. These are the original brand of anchor bolt the lift shipped with and I needed a new set when I moved to a new house and took the lift with me. You can also get them from MaxJax but they were cheaper here. This is the third set I've installed and they've always worked great.

LM
07/21/2022
Lawrence M.
United States United States

Wej-it PD58 drop in anchors

the purchase was easy and the product was delivered quickly. Install was easy wish it had come with the nut and washer for installation but I had one that fit.