$29.50 - $82.50 High-quality adhesive dispensing tools provide reliable and accurate functionality on the job siteColor of dispensing tool subject to change
$5.99 - $22.99 Strongest in solid materialsHolds securely even in hollow walls or ceilingsPolypropylene body seals hole
$38.99 - $144.18 Provides precise, rapid expansionEnlarged 3 dimple clipLength identification code stamped on each anchor
$53.80 - $213.30 Provides precise, rapid expansionEnlarged 3 dimple clipLength identification code stamped on each anchor
$17.40 - $96.25 Provides precise, rapid expansionEnlarged 3 dimple clipLength identification code stamped on each anchor
$10.15 - $56.50 Provides precise, rapid expansionEnlarged 3 dimple clipLength identification code stamped on each anchor
$200.00 - $300.00 For fastening shelf angles to concrete structuresTo be used with #425 Shelf Angle Wedge InsertInserts allow vertical adjustments
$110.00 Allows moisture to vent to exterior of the buildingProvides easy drainage for full head joint heightComes in clear, gray, or brownUV-resistant and tested in conformance to ASTM D2240, D790B, D638 and D1238B.
$52.50 - $170.00 Attaching brick veneers to existing backup wallAvailable in multiple and custom sizesUse with Channel Slots
$134.00 - $235.00 Attaching masonry/veneers or block to existing backup wallAvailable in multiple tie length sizesUse with Channel Slots
$103.00 - $255.75 Adjustable attachment of masonry/veneer wallsReplaces dovetail anchor systems in walls without dovetail slotsUse with Channel Anchors
$300.00 - $500.00 Transfer loads across control jointsInhibits lateral movementResists out-of-plane shear forces
$187.50 - $250.00 Secure masonry veneer to wood frame backup wall5/16” diameter hole for securingCustom sizing available
$64.50 - $150.00 Attaching masonry walls to structural steel beamsReversible for left or right side useStandard and custom sizing available
$260.00 - $625.00 Secure masonry veneer to wood frame backup wallAllows maximum airspace of 1”Custom sizing available
$20.00 - $33.80 Expands fully to provide high gripping powerEliminates high stress pointsAllows easy removability for service work
$99.60 - $350.00 Attaches directly to the backup systemWorks with various insulation thicknessesUsed with #282 Double Pintle Wire Tie
$175.00 - $210.00 Used with #213 Double Pintle Plate Veneer AnchorsAttaches directly to the backup systemWorks with various insulation thicknesses
$42.50 - $167.50 For attaching brick veneer to concrete backup wallsUsed with #100 dovetail anchor slotCustom sizes available
$125.00 - $350.00 One-piece non-adjustable anchorFor attaching brick veneer to existing concrete wall with dovetail slots12 gauge dovetail clip w/ 3/16” diameter triangle wire tie
$15.20 - $32.90 Easy to installIdeal for light-duty and tamper-resistant applicationsCorrosion resistant zamac alloy body
$6.80 - $29.10 Easy to installIdeal for light-duty and tamper-resistant applicationsCorrosion resistant zamac alloy body
$50.40 - $66.20 For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
$9.00 - $13.20 For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
$58.60 - $77.90 For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
$57.70 - $76.80 For steel purlins, lightweight to normal weight concrete, wood & timber, hollow core and concrete plank applications
$30.00 - $40.00 For fastening shelf angles to concrete structuresTo be used with #427 Askew Head BoltInserts allow vertical adjustments
$4.00 - $18.00 Easy to installOffers consistent holding powerAllows easy removability for service work
$94.80 - $111.90 Easy to installOffers consistent holding powerAllows easy removability for service work
$73.20 - $96.30 Easy to installOffers consistent holding powerAllows easy removability for service work
$79.00 - $123.00 Tying masonry walls to horizontal steel columnsUse with Bottom Flange Beam and Wall AnchorCustom sizing available
$16.50 - $22.00 Won’t shrink or sagFor both solid and hollow base materialsSolvent-free, allowing for greater flexibility
$17.20 - $25.90 Bonds to smooth diamond core drilled holesFor both solid and hollow base materialsStyrene-free
$114.50 - $215.00 Anchor wood joists to a masonry wallMill galvanized for strength and corrosion resistanceSecures to top or bottom of joist
$95.50 Attaching cement block to structural steel beamsWorks in pairs (left and right side)Standard and custom sizing available
$29.60 - $119.50 Single-piece and easy to install in wet concreteMade with high-grade steelNuts and washers are included
$22.00 - $80.10 Single-piece and easy to install in wet concreteMade with high-grade steelNuts and washers are included
$9.90 - $33.50 Ideal for concrete, masonry and mortar jointsZamac alloy finish is corrosion resistantAllows easy removability for service work
$136.80 - $225.60 Adjustable attachment of masonry/veneer wallsReplaces dovetail anchor systems in walls without dovetail slotsUse with Channel Anchors
$8.00 - $20.00 For use with a machine bolt in concrete, block, brick or stoneFits into irregular holesSetting tool provided in each box of anchors
$20.80 - $29.30 For use with a machine bolt in concrete, block, brick or stoneFits into irregular holesSetting tool provided in each box of anchors
$52.40 - $125.90 Use for light to normal weight concrete and solid masonryGuiding notch on the anchor headMinimize wedge loosening under vibratory load
$83.50 - $237.50 Available tie lengths: 3”, 3-1/2,” 4” and 5”3/16” diameterCan be modified to meet Seismic Zone requirements
$26.09 - $147.03 Used to shim shelf angles or stone anchors when concrete walls are not plumb. High Impact multi-polymer plastic shims with up to 4500 psi compressive strength.
$55.00 Plastic clip for attaching any 3/16” or 9 gauge masonry veneer anchor to a single horizontal reinforcing wire in the veneer.
$190.00 2" diameter plastic washer, solid cap designCompatible with Original Pos-I-Tie® Anchoring SystemFast on-the-wall fastener assembly
$120.00 - $400.00 Compatible with Original Pos-I-Tie® Anchoring SystemCan be modified to meet Seismic Zone requirementsAvailable in 3 finishes
$30.40 - $93.80 Easy to installPre-formed one-piece designFor use in concrete, grout-filled block, or masonry
$8.10 - $35.20 Easy to installPre-formed one-piece designFor use in concrete, grout-filled block, or masonry
$20.60 - $57.20 Internally threaded anchorWedge performance with the convenience of drop-inNumerous head style options
$340.00 - $450.00 Machine lathed from a single pieceExclusive FRICTION-FIT™ allows immediate fasteningEasy installation
$350.00 - $920.00 Machine lathed from a single pieceExclusive FRICTION-FIT™ allows immediate fasteningEasy installation
$120.00 - $280.00 Machine lathed from a single pieceExclusive FRICTION-FIT™ allows immediate fasteningEasy installation
$19.50 - $44.60 Heat treatment provides surface and core hardnessSerrated head facilitates a positive lockCan be removed and reinstalled
$17.60 - $40.70 Heat treatment provides surface and core hardnessSerrated head facilitates a positive lockCan be removed and reinstalled
$50.00 - $300.00 Non-adjustable wire wall tieUse to bond masonry veneer to a masonry back-up wall2” bends in a variety of sizes and gauges
$200.00 - $500.00 The Screw-On Anchor Plate is used for attaching brick veneer to a masonry backup wall with appropriate fasteners. Use #316 Triangle Wire Ties for anchoring the masonry veneer.
$56.00 - $90.00 Two-piece, adjustable anchors used for attaching brick veneer to a masonry backup wall that does not have continuous insulation. Use #316 Triangle Wire Ties for anchoring the masonry veneer.
$24.90 - $97.90 Carbide-tipped drill bit with 6 cutting edgesReduced vibration and noiseReduced breakage when encountering rebar
$3.00 - $40.70 Centering tip reduces bit walkingReduced friction during dust removalDecreased vibration back into the tool
$6.30 - $8.60 Centering tip reduces bit walkingReduced friction during dust removalDecreased vibration back into the tool
$129.75 - $150.00 For fastening shelf angles to concrete structuresTo be used with #427 Askew Head BoltsInserts allow vertical adjustments
$19.30 - $31.90 Holding power unaffected if bolt is removed and replacedEntire fastener is corrosion-resistantAllows easy removability for service work
$37.70 - $250.00 From lightweight concrete and hollow masonry to normal weight concrete and solid masonry applicationsSleeve-TITE® Sleeve Anchor
$9.40 - $30.80 From lightweight concrete and hollow masonry to normal weight concrete and solid masonry applicationsSleeve-TITE® Sleeve Anchor
$5.49 - $26.99 Holds securely in walls & ceilingsUnique locking action resists vibration and shockStrongest holding of all self-drilling drywall anchors
$5.99 - $82.99 Carry twice the load than standard wing anchorsSmallest installation hole for each bolt sizeProvide superior holding with metal-to-metal fastening
$7.99 - $229.99 Carry twice the load than standard wing anchorsSmallest installation hole for each bolt sizeProvide superior holding with metal-to-metal fastening
$250.00 - $440.00 Economical solution for securing and stabilizing masonryStainless-steel helical tie is dry setNo toxic adhesives or rigid mechanical connectors needed
$23.00 - $42.00 Centering tip reduces bit walkingReduced friction during dust removalDecreased vibration back into the tool
$146.90 - $676.80 Anchor precast concrete panels to steel framesThreaded inserts permit anchor bolts to be removedMore reliable that typical expansion anchors
$52.20 - $136.60 Easy to installDepth of hole not criticalYellow dichromate finish is corrosion resistant
$230.00 - $1,110.00 New breakthrough in masonry constructionCompatible with Double Pintle Wire Ties & ThermaClip® Stone Anchors100 times lower thermal conductivity than steel
$15.00 - $17.80 44 pc variety pack or 50 pc SnapSkruProvides the best selectionInclude screws needed for each anchor
$2.75 - $23.99 Use in almost any material5/16” drill hole required for installation159 lb max hold in 5/8” drywall
$75.00 - $292.50 For attaching brick or CMU to backupTo be used with adjustable backup anchorsVarious sizes available
$1.80 - $14.00 Easy to installOffers consistent holding power in shallow embedmentEliminates requirement for rod couplings
$60.60 - $228.80 Easy to installOffers consistent holding power in shallow embedmentEliminates requirement for rod couplings
$78.10 - $303.20 Easy to installOffers consistent holding power in shallow embedmentEliminates requirement for rod couplings
$8.30 - $84.00 Easy to installOffers consistent holding power in shallow embedmentEliminates requirement for rod couplings
$78.00 - $130.00 For attaching CMU horizontally to backupTo be used with adjustable backup anchorsVarious sizes available
$2.00 - $2.60 Carbide-tipped drill bit for Wej-Con ScrewsReduced vibration and noiseReduced breakage when encountering rebar
$28.00 - $48.00 Cuts threads in structural materialSurface coating for corrosion resistanceDrill bit included in each box
$7.30 - $26.40 Cuts threads in structural materialSurface coating for corrosion resistanceDrill bit included in each box
$30.00 - $50.00 Cuts threads in structural materialSurface coating for corrosion resistanceDrill bit included in each box
$7.60 - $27.10 Cuts threads in structural materialSurface coating for corrosion resistanceDrill bit included in each box
$88.00 - $225.00 For attaching masonry to structural steel1/4" diameter in 5" or 9" lengths3/8” offset
$48.00 - $165.00 Tying masonry walls to steel columnsUse when column flanges are parallel to wallStandard and custom sizing available
$80.00 - $325.00 Tying masonry walls to steel columnsUse when column flanges are perpendicular to wallStandard and custom sizing available
$130.43 - $177.86 Used to center vertical rebar in CMU walls9 gauge wire with 1” diameter eyes in centerAvailable for 8” and 12” block
$86.40 Use as tie between intersecting masonry walls1/4" thick x 1-1/2" wide x 24" long w/ 2" bendsCustom sizes available
$52.50 - $245.00 Non-adjustable wire wall tieUse to bond masonry veneer to a masonry back-up wall2” bends in multiple lengths and gauges