Hollo Set™ Drop-In Anchor- Zinc Plated Carbon Steel Mechanical Anchors Wej-It

Roll over image to zoom in

Hollow Set™ Drop-In Anchor — Zinc Plated Carbon Steel

This internally threaded flush mount expansion anchor is effective for use in both hollow and solid base materials. When a hole is drilled, wall thickness can decrease to less than 1”. The Hollow Set anchor provide high-performance fastening in these applications.


Pack Price

$70.00

Quantity

USA

ENGINEERED IN THE USA

Ships Fast within 24 hours
Orders received before 2:00pm EST Monday through Friday usually ship the same business day. We will send an email confirming your order the day your order is received. When your order ships we will send you a second email with your paid invoice and information to track your order.

Installation will require the following items:

Materials / Finishes

Available in:
304 Stainless Steel
Zinc Plated Carbon Steel

Features and Benefits

  • Used in hollow and solid base materials
  • Superior design allows installation in materials with thin walls
  • Internally threaded anchor allows easy bolt removal and service work
  • Slots on expansion cone prevent cone from separating from sleeve during installation

Downloads

Product Details
Installation
Catalog Number
Drill Bit Dia.
Thread Size
Anchor Length
Box Quantity
Carton Quantity
WDHS14
3/8
1/4 - 20
7/8
100
1000
WDHS38
5/8
3/8 - 16
1-5/16
50
500
WDHS12
3/4
1/2 - 13
1-3/4
50
250

Instructions for Solid Base Materials

  1. Drill the hole perpendicular to the work surface at the required embedment depth.
  2. Clean the hole using compressed air and a nylon brush.
  3. Insert the anchor into the hole with the expansion cone facing downward. Put the Solid-Base Setting Tool into the anchor and strike with a hammer to engage the expansion cone.
  4. Insert the bolt through the fixture and tighten.

 Instructions for Hollow Base Materials

  1. Drill the hole perpendicular to the work surface into the hollow cavity of the substrate.
  2. Clean the hole using compressed air and a nylon brush.
  3. Insert the anchor into the hole with the expansion cone facing downward and tap flush to the level of the work surface.
  4. Insert the bolt through the fixture and tighten.
    When using the hollow base Setting Tool, thread anchor into tool before tapping into anchor hole. Turn setting tool clockwise to tighten.

NOTE: Always wear safety glasses. Follow drill manufacturer’s instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Reviews