Single Expansion Shield

Stock: 500+ Left

$19.20

Description

Our Single Expansion Shield anchor is corrosion resistant. The expansion cone is drawn into the anchor body as the machine bolt is tightened, and holding power is unaffected if bolt is removed and replaced.

Fast & Secure Packaging

Ships fast in 24 hours

Dedicated Customer Support

Materials / Finishes

Zamac alloy

Features and Benefits

Entire fastener is corrosion-resistant
Bolt can easily be removed during service work without replacing the anchor
Accepts machine screws
Suitable for use in normal weight and lightweight concrete

Downloads

Technical Flyer

Product Details

Installation

Catalog Number

Drill Bit Dia.

Thread Size

Anchor Length

Box Quantity

Carton Quantity

SES14

1/2

1/4 - 20

1-5/16

100

1000

SES56

5/8

5/16 - 18

1-1/2

50

500

SES38

5/8

3/8 - 16

1-1/2

50

500

SES12

7/8

1/2 - 13

2

25

200

SE558

1

5/8 - 11

2-5/8

25

200

Drill hole of recommended diameter (slightly deeper than length of shield).
Clean the hole using compressed air and a nylon brush.
Install shield flush with surface of hole threaded side down. Double shield should be flush to slightly below masonry.
Place fixture. Insert machine bolt through fixture into shield and tighten.

**To determine length of bolt: thickness of fixture plus length of shield, equals length of bolt

NOTE: Always wear safety glasses. Follow drill manufacturer's safety instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.