Hang-TITE™ Rod Hanger Screw- Concrete Rod Hanger Anchor Mechanical Anchors Wej-It

Hang-TITE™ Rod Hanger Screw — Concrete applications

Stock: 500+ Left

$79.40

Description

This is a one-piece, internally threaded rod hanger screw designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, electrical conduit and it can be installed in a variety of base materials. A horizontal-mount version is available for the steel and wood rod hanger screws. All Hang-TITE Rod Hanger Screws require the use of the proper installation tool: the universal socket for the steel and wood rod hanger screws and the appropriately sized socket for the concrete rod hanger screws. VERTIGO - SAMMY - HANGERMATE

Fast & Secure Packaging

Ships fast in 24 hours

Dedicated Customer Support

Materials / Finishes

Available as Zinc-plated Carbon Steel for:
Concrete applications
Steel applications
Wood applications

Features and Benefits

One-pieces screw design: threaded portion of the screw will not prematurely break away from the screw head
Available in various thread types for concrete, wood or steel
Horizontal (side) mount available for both steel and wood Hang-TITE screws
Rapid installation: all Hang-TITE screws can be installed using a screw gun or drill

Downloads

Technical Flyer

Product Details

Installation

Catalog Number

Vertical / Side

Rod Size (UNC)

Screw Thread Size and Length (in.)

Point Style

Box Quantity

Carton Quantity

HTCV141411

Vertical

1/4-20

1/4 x 1-1/4

1/4

100

500

HTCV381412

Vertical

3/8-16

1/4 x 1-1/2

1/4

100

500

HTCV123823

Vertical

1/2-13

3/8 x 2-3/4

3/8

50

250

Concrete

Use the correct size masonry drill and drill the hole at least one anchor diameter deeper than the calculated embedment depth. Clean the hole using a nylon brush and compressed air.
Select the appropriate size socket driver (Part No. HTCST14, HTCST38 or HTCST12) and mount it into the chuck of the drill.
Insert the head of the anchor into the socket driver.
Press tip into pre-drilled hole and install with a smooth, steady motion until the anchor is firmly seated against the concrete.
Thread the appropriate diameter steel threaded rod or threaded bolt into the anchor. The threaded rod or bolt should fully engage the thread length of the anchor.