Designed & Shipped from USA
Wej-It Logo
POWER-sert™ Adhesive Insert Anchor- Zinc Plated Carbon Steel Adhesives Wej-It
Wej-It

POWER-sert™ Adhesive Insert Anchor — Zinc Plated Carbon Steel

$283.50

Description

The POWER-Sert Adhesive Anchor is a proprietary internally threaded insert designed for use with structural adhesive. Our unique undercut design requires less adhesive and a shallow embedment while providing superior holding values
in a variety of materials. Our exclusive FRICTION-FIT™ locks adhesive in place and allows immediate fastening of the fixture during cure time*. The POWER-Sert adhesive insert anchor is the ultimate problem solver!

Fast & Secure Packaging

Ships fast in 24 hours

Dedicated Customer Support

Materials / Finishes

Available in:
304 Stainless Steel
316 Stainless Steel
Zinc Plated Carbon Steel

Features and Benefits

  • Exclusive FRICTION-FIT design allows immediate fastening of fixture while adhesive cures*
  • Machine lathed from a single piece of steel or stainless steel providing no weak points
  • Does not apply expansion forces to base material, allowing shorter spacing and edge distance requirements
  • Vibration resistant
  • Easy installation
  • Uses half the amount of epoxy

Downloads

icon

Anchors for every load, project and skill level.

icon

Trusted brand by professional builders.

icon

Guaranteed performance.

icon

Proudly Designed and Shipped from USA.

Product Details
Installation
Catalog Number
Thread Size (UNC)
Drill Bit Dia.
Anchor Size
Min. Hole Depth
Box Quantity
Carton Quantity
PS2-14
1/4-20
5/16
5/16 x 1-9/16
1-3/4
100
800
PS2-56
5/16-18
7/16
7/16 x 2-3/8
2-3/4
100
800
PS2-38
3/8-16
1/2
1/2 x 2-3/4
3-1/4
50
400
PS2-12
1/2-13
5/8
5/8 x 3-11/16
4-1/8
25
200
PS2-58
5/8-11
7/8
7/8 x 5-3/4
6-1/4
10
80
PS2-34
3/4-10
1
1 x 6-1/2
7-1/2
5
40
PS2-1
1-8
1-1/2
1-1/2 x 8-1/2
9-1/2
5
15

  1. Select the proper size drill bit from the estimating guide. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
  2. Thoroughly clean hole with oil-free compressed air and a stiff nylon or wire brush. Repeat cleaning process 3 times. Dust and debris left in hole will significantly reduce the holding capacity of the anchor.
  3. Inject Inject-TITE Two-Part Structural Epoxy into hole to approximately
    1/3 to half full. Fill from bottom of hole up. 1
  4. Choose a bolt equal in length to the thread depth plus the material depth. Thread bolt into POWER-Sert anchor so that offset is equal to the thickness of material to be fastened. Insert POWER-Sert anchor into hole with slight twisting motion.
  5. Drive anchor home with several sharp hammer blows to the head of the nut.
  6. Allow epoxy to cure prior to applying maximum load.

NOTE: Always wear safety glasses. Follow the drill manufacturer’s safety instructions.
Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Frequently Asked Questions

Please email us at orders@anchorco.com for a custom quotation.

Orders ship within 24 business hours after we receive them. Orders received before 2:00pm EST Monday through Friday usually ship the same business day (unless otherwise noted).

We are closed on the following holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, the day after Thanksgiving, and Christmas Day.

All orders ship from Connecticut. The drop-down menu in the shopping cart that shows the shipping rates also shows the number of days in which your order should reach you.

We send an email confirming your order the day your order is received. When your order ships we send a second email with your paid invoice and information to track your order.

If you have any questions or problems, please email us at orders@anchorco.com.

We do not have any retail locations. We are happy to meet all your anchoring needs with the anchorco.com website.

We do not ship internationally outside of the USA.

Please email us at orders@anchorco.com and our Customer Service department will be happy to assist you.

Our shopping cart is powered by Shopify, one of the most respected eCommerce platforms. It uses state of the art encryption and privacy tools to secure your purchase and your online account with us.

If you have any questions or problems, please email us at orders@anchorco.com.

Reliable Shipping

Fast, reliable shipping with UPS—every order, every time.

Secure Payments

Your payments are protected with Shopify’s advanced encryption.

Customer Support

Questions? Email orders@anchorco.com or call (203) 970-3175.

Reviews

Customer Reviews
4.8 Based on 5 Reviews
5 ★
80% 
4
4 ★
20% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
CC
01/31/2023
Chandler C.
United States United States

Epoxy anchors

Everything is going well as of now. Great product

BC
10/10/2022
Bill C.
United States United States

Great Drill Bits

These bits have been outstanding. Lasting much longer than $25-$50 bits. My team is extremely satisfied with their performance.

JF
02/11/2022
Jim F.
United States United States

Review of PS-58

Great, the instructions were clear. I used Quik-Crete structural adhesive and let it cure for 72 hours before putting a load on the parts. Holding solid!

JN
09/21/2021
Joe N.
United States United States

Power-sert!!

Great and easy to install

JG
05/14/2021
John G.
United States United States

Pretty good.

Pretty good so far