Sleeve-TITE | Heavy Duty Concrete Anchor | Expansion Anchor
Mobile nav open Mobile nav close
Site Logo
Cart Icon
Wej-It Logo
Sleeve-TITE™ Sleeve Anchor — Zinc-Plated Carbon Steel

Roll over image to zoom in

Sleeve-TITE™ Sleeve Anchor — Zinc-Plated Carbon Steel

This high-strength pre-assembled expansion anchor is designed for anchoring into concrete and masonry applications. The Sleeve-TITE anchor has a 6-dimple expansion sleeve over a threaded stud bolt, which provides superior performance in all conditions.


Pack Price

$16.00

Quantity

USA

ENGINEERED IN THE USA
Ships Fast within 24 hours
Orders received before 2:00pm EST Monday through Friday usually ship the same business day. We will send an email confirming your order the day your order is received. When your order ships we will send you a second email with your paid invoice and information to track your order.

Materials / Finishes

Open Icon Close Icon

Available in:
304 Stainless Steel
Zinc-Plated Carbon Steel

Features and Benefits

Open Icon Close Icon
  • 6-dimple expansion sleeve allows the anchor to grip imperfections in the base material
  • Large expansion cone requires fewer rotations to achieve desired torque
  • One-piece sleeve design allows stress to be distributed over the entire contact area
  • Length identification code stamped on head to ease identification pre- and post-installation
  • Pre-assembled with nut and washer for immediate installation, eliminating missing components
  • Available in a number of head styles for a wide variety of applications

Downloads

Open Icon Close Icon

Technical Flyer

Product Details
Installation
Catalog Number
Head Style
Anchor Size
Drill Bit Dia.
Min. Embed.
Box Quantity
Carton Quantity
ASA1458
Acorn Nut
1/4 x 5/8
1/4
1/2
100
1000
ASA1413
Acorn Nut
1/4 x 1-3/8
1/4
1-1/8
100
1000
ASA1421
Acorn Nut
1/4 x 2-1/4
1/4
1-1/8
100
800
HSA5612
Hex Nut
5/16 x 1-1/2
5/16
1-3/16
100
800
HSA5622
Hex Nut
5/16 x 2-1/2
5/16
1-3/16
100
800
HSA3813
Hex Nut
3/8 x 1-7/8
3/8
1-1/4
50
400
HSA3830
Hex Nut
3/8 x 3
3/8
1-1/4
50
400
HSA3840
Hex Nut
3/8 x 4
3/8
1-1/4
50
400
HSA1221
Hex Nut
1/2 x 2-1/4
1/2
1-1/2
25
200
HSA1230
Hex Nut
1/2 x 3
1/2
1-1/2
25
200
HSA1240
Hex Nut
1/2 x 4
1/2
1-1/2
25
200
HSA1260
Hex Nut
1/2 x 6
1/2
1-1/2
25
200
HSA5821
Hex Nut
5/8 x 2-1/4
5/8
2
25
200
HSA5830
Hex Nut
5/8 x 3
5/8
2
25
200
HSA5841
Hex Nut
5/8 x 4-1/4
5/8
2
10
80
HSA5860
Hex Nut
5/8 x 6
5/8
2
10
80
HSA3422
Hex Nut
3/4 x 2-1/2
3/4
2-1/4
10
80
HSA3440
Hex Nut
3/4 x 4
3/4
2-1/4
10
80
HSA3461
Hex Nut
3/4 x 6-1/4
3/4
2-1/4
10
80
CSA3813
Rod Coupling (UNC)
3/8 x 1-7/8
3/8
1-1/4
50
400
CSA1221
Rod Coupling (UNC)
1/2 x 2-1/4
1/2
1-1/2
25
200
CSA5821
Rod Coupling (UNC)
5/8 x 2-1/4
5/8
2
25
200
FSA1421
Flat Head
1/4 x 2-1/4
1/4
1-1/8
100
800
FSA1431
Flat Head
1/4 x 3-1/4
1/4
1-1/8
100
800
FSA1440
Flat Head
1/4 x 4
1/4
1-1/8
100
800
FSA3823
Flat Head
3/8 x 2-3/4
3/8
1-1/4
50
400
FSA3830
Flat Head
3/8 x 3
3/8
1-1/4
50
400
FSA3840
Flat Head
3/8 x 4
3/8
1-1/4
50
400
FSA3850
Flat Head
3/8 x 5
3/8
1-1/4
50
400
FSA3860
Flat Head
3/8 x 6
3/8
1-1/4
50
400
WTSA5612
Tie-Wire
5/16 x 1-1/2
5/16
1-3/16
100
1000

  1. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
  2. Drill the hole at least 1 anchor diameter deeper than the calculated embedment depth, but not closer than two anchor diameters to the
    bottom surface of the concrete. Through drilling is allowed when 1 using sleeve anchors in hollow concrete block.
  3. Clean the hole using compressed air and a nylon brush. A clean hole is necessary for proper performance.
  4. Drive anchor through the fixture into the hole making sure the nut, or head, rests solidly against the fixture. Be sure the anchor is set to the required embedment depth.

NOTE: Always wear safety glasses. Follow drill manufacturer's instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Reviews